KCB stainless steel gear pump features and maintenance

KCB stainless steel gear pump features:
KCB stainless steel gear pump gear, shaft, pump body, safety valve , shaft seal (special requirements can be magnetic drive, zero leakage structure) formed. The gears are heat-treated to a higher hardness and strength and mounted with the shaft in a replaceable hub. The lubrication of all parts in the pump is automatically achieved using the output medium while the pump is in operation.

KCB stainless steel gear pump has a well-designed drain and return tank, the gear in the work to withstand the torque of the smallest, so the bearing load, wear small, high pump efficiency. The pump has a safety valve as overload protection, safety valve full back pressure of 1.5 times the rated pump exclusion pressure, but also allows the discharge pressure within the scope of the actual need to be adjusted. But note that the safety valve can not be used for long-term work of the valve, if necessary, can be installed separately in the pipeline.

From the spindle extension to the pump to see, clockwise rotation.

Whether the pump is fastened by fasteners; whether the valve in and out of the pipe is opened; whether the direction of rotation of the pump meets the requirements; and when the high temperature medium is started, the jog operation should be used for one minute before connecting the work.

KCB stainless steel gear pump maintenance work:

Note KCB stainless steel gear pump pressure should be consistent with technical specifications; Note shaft seal, if leakage occurs, depending on the degree of fine-tuning the screw, do not over-tighten; Do not adjust the safety valve adjustment bolt rod; abnormal noise , Should immediately stop working for inspection.

Main Features
Controlled by built-in overlapped or parallel-connected electromagnetic precursor valve, with advanced craft and reliable action;
Diaphragm of main valve adopts imported special rubber, with high anti-corrosion and resisting low temperature at -40°C;
Special stainless steel magnetic material never rust or generate remanent magnetism;
Close the main valve when the working pressure is 0.3-0.4MPa, and the small flow system will be 3-3.5L/min, which can be designed according to users' requirements.

Solenoid Valve

High Flow Solenoid Valve, High Pressure Solenoid Valve, Bosch Solenoid Valves, Flameproof Double Flow Solenoid Valve

Shanghai Jiasong Machine Co., Ltd , http://www.fuel-dispenser-parts.com