The use of electric hydraulic pump and maintenance precautions

Electric hydraulic pump uses:
1.Electric hydraulic pump can be used as a variety of hydraulic equipment hydraulic pump.
2. After the electric hydraulic pump and other hydraulic tools are equipped, it can carry out a great deal of work such as lifting, pressing, bending, bending, aligning, shearing, assembling and disassembling. Reduce labor intensity, improve work efficiency.
Electric hydraulic pump Usage:
Open the bleed nut when using, open the switch on the oil collecting block, plug in the power supply, and fasten the quick connector on the quick head equipped with hydraulic equipment. Press the power switch, until the motor rotates 1-2 minutes, the switch is closed at the supercharged state, the hydraulic oil output at this time will carry out various tasks, the output hydraulic oil with the increase of load self-pressurization of the work until 63MPA .
After the work, open the switch to unload until the hydraulic oil back to the end, remove the quick connector sleeve, spin a good deflated nut, unplug the power, the switch off.
Electric hydraulic pump maintenance precautions:
1. The pump uses 20 oil.
2. Oil storage capacity must be within the oil window range.
3. Each refueling and oil change, must be more than 80 mesh filter oil filter, replace the need to wash the fuel tank. Oil change period of six months.
4. Working oil temperature 10 degrees Celsius to 50 degrees Celsius.
5. Before starting the electric pump, open the bleed nut and open the switch to unload position.
6. The process of using the motor temperature is too high, should be discontinued. Self-cooling before use.
7. The pump has been adjusted before leaving the factory, not free high-profile, to be readjusted, you must use the pressure gauge.
8. High-pressure tubing factory, after 105MPA test. However, due to easy aging hose, so the user should always check, usually six months, frequent use for three months, check 87.5MPA pressure test, if damaged, raised, leakage can not be used.
9. Bearings are generally cleaned once every six months, the assembly need to add grease.

Aluminum Die Casting Electrical Motor Parts are a metal forming process in which molten aluminum metal is put under pressure and injected into a die. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight and spend less expense than other manufacturing processes.

Aluminum Die Casting Electrical Motor Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.

Aluminum Die Casting Electrical Motor Parts are efficient and economical and offers a wide range of durable shapes and components. Little or no machining is required after a part is die casted, because the process provides very close tolerances for even complex shapes. Aluminum Die Castings can also be easily plated or finished. Aluminum Die Casting Electrical Motor Parts are dimensionally stable and heat resistant.

We have professionally produced Aluminum Die Casting Electrical Motor Parts nearly 7 years. The parts have a great property of high quality, high precision, reasonable competetive price. our products are very popular.

Aluminum Die Casting Electrical Motor Parts

Castings of Electrical Motor Parts, Aluminum Die Casting of Electric Motor Parts, Die Casting Components, Aluminum Casting of Electrical Motor

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com