Submersible sewage pump structure and structural characteristics

Due to the high environmental requirements of today's work, a lot of effort has been devoted to ensuring the leak tightness of the pump when producing submersible sewage pumps. In production to achieve the desired requirements so that they can play an important role in the work to achieve the effect of saving time and effort. Today for the structural characteristics of submersible sewage pump finishing a series of submersible sewage pump structure and structural features introduced to help you better understand this product. Submersible sewage pump structure and structural characteristics Submersible sewage pump It is a pump and motor Siamese and submerged work under the machinery, which proves that it is different from the general horizontal sewage pump or vertical sewage pump. Structural characteristics are the following: 1, because it is under the liquid work, waterproof is very good, it will not be damaged by cavitation and leakage and other issues. 2, do not need to specially build pump house placement, the pump compact structure covers an area of ​​small, can be placed directly in the water for work. 3, will not cause pollution, vibration and noise is small, the temperature generated by the motor operation is low, there is no phenomenon of burning motor. 4, installation and configuration of human, disassembly installation without laborious, save a lot of time for staff. 5, the working life is relatively long. Pump motor coaxial, rotating parts of light weight, will not cause excessive load on the bearing load. 6, good liquidity, easy to accumulate dirt, an open impeller will clean itself. 7, in emergencies such as overload fever. An alarm will be issued when the oil leaks and pump will be stopped automatically to protect the pump. I believe we have a deeper understanding of submersible sewage pump now! High requirements to create a perfect work efficiency, whether it is easy to operate or structural sealing performance, the carrying capacity of the motor part, are much higher than the average sewage pump. Looking back at the past, submersible sewage pump step by step has 60 years of history, looking to the future, efficient work rate and its own unique advantages will play a unique field, has broad prospects for development.

Ferrites are usually non-conductive ferrimagnetic ceramic compounds derived from iron oxides such as hematite (Fe2O3) or magnFerrites are usually non-conductive ferrimagnetic ceramic compounds derived from iron oxides such as hematite (Fe2O3) or magnetite (Fe3O4) as well as oxides of other metals.

Manufacturing process:

1). Dry process:By dry process, can produce isotropic & anisotropic magnets. The tool can be changed and developed easily.

2). Wet process:By wet process, only anisotropic magnets can be produced. It is complicated to change the tool and the tooling charge is much higher.

Magnetization:

1). Isotropic ferrite magnets are not oriented and can be magnetized in any direction.

2). Anisotropic ferrite magnets are different, they are all oriented in the manufacturing direction, and should be magnetized in the direction of orientation.

Ferrite Magnet

Ferrite Magnet,Sintered Ferrite Magnet,Ferrite Round Magnet,Hard Ferrite Magnet

Chongqing Great Well Magnet Co.,ltd. , https://www.gwmagnet.com