QBY-type pneumatic diaphragm pump features

QBY-type pneumatic diaphragm pump is currently the most widely used type of pneumatic diaphragm pump. The use of clean compressed air as a power source, both to move the liquid flow, but also transport some difficult to flow medium, integrated self-priming pump, submersible pumps, shielded pumps, mud pumps and impurity pumps and other delivery machinery, many of the advantages. The characteristics of this pump are as follows: QBY-type pneumatic diaphragm pump 1. Without irrigation water, with self-absorption capacity; flow channel spacious, through the good performance, allowing the maximum particle diameter of 10mm. Pumping mud, impurities, the pump wear very little; no lubrication, even idling, the pump will not have any impact; 2. Head, flow through the valve opening to achieve stepless regulation, flow with back pressure (export load ) Automatically adjust the change, suitable for pumping medium and high viscosity media; and centrifugal pumps are based on water-based design criteria, if used for slightly higher viscosity media, you need to support reducer or inverter, the cost is much increased. 3. No electricity, no spark after grounding, safe and reliable and low cost in flammable and explosive environment; 4. Simple structure, less wearing parts, low maintenance cost in later stage; small size and easy to move, Small area, without foundation, easy to install and economical, can be used as a mobile material pump; 5 low shear force, the agitation of the fluid small, in the transport of physical and chemical instability in the medium has inherent advantages; Diaphragm will be completely separated from the media and the outside world, the transmission of hazardous, corrosive medium obvious advantages or in some experiments to ensure that the material from the outside world pollution; 7. In harsh conditions, such as construction sites, operating conditions of wastewater discharge , Due to the impurities and more sewage composition, easy to plug the pipeline, thus forming a load on the pump is too high, the motor easy to heat damage, the pneumatic diaphragm pump can automatically adjust the flow and automatically stop when the pipeline is blocked Until smooth; 8. Can transport more viscous medium (viscosity ≤ 10000 cps), can be immersed in the media work. Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)

Silicon Carbide particle size sand.

It is also known as silicon carbide sand,generally divided into mesh grade sand from 8#-320#,the greater the number is,the smaller particle size it is.

The size over 320# generally referred as the silicon carbide micro powder.Silicon carbide particle size of sand is dvided into green and black.

It is the ideal for abrasive material,mainly used in polishing and grinding wheel,cutting slices,and etc sectors in abrasive industry.

Silicon Carbides Sand Of Particle Size

Silicon Carbides Sand Of Particle Size,Silicon Carbide Grinding Wheel,Silicon Carbide Grit

NINGXIA PANSON COAL AND CARBON CO., LTD , https://www.nxpanson.com