Submersible pump inspection and storage

In the safe operation of the submersible pump process, the first thing to do is the submersible pump inspection and storage, which is the necessary conditions for the safe operation of the submersible pump. The following small series to introduce submersible pump inspection and installation should pay attention to the matter! Submersible pump 1, submersible pump motor test units should be regularly tested, qualified before they can put into use. 2, check the cable and the pump body is connected closely, the cable does not crack or damage the edge. Check the measurement of protective ground wire and the metal shell of the pump in good contact. 3, submersible pump should be kept and maintained by someone, there is leakage of oil to be promptly eliminated. 4, after the repair of the oil-immersed submersible pump, should be 196KPa (2Kgf / cm2) pressure test, check the Department of no leakage, and then add the lubricating oil on the lower shell. Industrial Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Daohui (QQ / WeChat:) http://beng.liuti.cn/ (Service Hotline:)

Laser tape

Laser tape,High Quality Laser tape,Laser tape Details, Nanjing Youzegold Trade Co., Ltd.

Garden Tie Tape Co., Ltd. , http://www.dotape.com