Stainless steel submersible pump safe use of what?

Submersible pumps are widely used in mine rescue, industrial cooling, farmland irrigation, sea water lifting, shipping transfer, fountain landscape and so on, is an important equipment for deep well water, in addition, but also for central air conditioning Cooling, heat pump units, cold pump units, cities, factories, railways, mining, site drainage. Standard use can extend the life of the equipment, save the cost of replacing equipment costs. On the contrary, increase the input of costs, but also hinder the production. So submersible pump safe use of what? Today Xiaobian share several stainless steel submersible pump safe use of the specification. Stainless steel submersible pump use what are the rules? 1, Stainless steel submersible pump work, we should pay attention to the situation of water level drop, submersible pump shall not work out of the water. 2, the use of found submersible pump stalls, less water, noise and heat protectors frequently take off and so on, should be promptly stopped pump. 3, check the power supply voltage is too low or power, cable breakage or lack of phase. 4, check whether the impeller jamming or wear, water chamber is blocked, head is too high or too low, the filter is blocked and so on. If there is any fault, find the appropriate solution. 5, in case of stator winding burnout and other faults, repair unit to be repaired, reassemble, the sealing parts to be done to check the pressure. 6, Cable found damaged immediately replaced before use, such as stainless steel submersible pump for pumping more viscous slurry, should be placed in clean water power running for a few minutes, wash the pump slurry, and then dry coated Antirust oil, stored in dry gout. The above is the use of stainless steel submersible pump specifications for your reference. This article belongs to Industrial Internet (Xiamen) Technology Co., Ltd. All are welcome to reprint, please indicate the author and source. Author: Asian pumps Network Editor: Yue Lijuan (QQ / micro letter:) starting: http: //beng.liuti.cn/ (service hotline:)

Metal silicon, also known as Crystalline Silicon or Industrial Silicon, is mainly used as an additive to non-ferrous based alloys. Metal silicon is a product made of quartz and coke in an electric furnace. The content of silicon in the main component is about 98% (in recent years, 99.99% of Si is also contained in metal silicon), and the remaining impurities are iron and aluminum. , calcium, etc.

Silicon Metal

Silicon Metal,Metallic Silicon,Crystalline Silicon,Industrial Silicon

Ningxia Evergreen Trading Co., Ltd. , https://www.nxevergreen.com