Sprayed bar sprayers for large area spraying of pesticides use a piston diaphragm pump, which is a reciprocating positive displacement pump with pulsating pressure. Diaphragm pump power generally come from the tractor, driven diaphragm pump speed is generally 500-600r / min to two-cylinder pump, for example, the water pulsation is 1000-1200 times / min. Outlet pulsation on the spray machine and spray quality are harmful, in order to eliminate pulsation, in such pumps with an important component; gas chamber. The function of the air chamber is to utilize the compressibility (or elasticity) of the air to absorb the pulsation of the diaphragm pump and stabilize it.
The structure of the air chamber is generally separated by a rubber diaphragm that separates the water chamber from the air chamber. After filling the air cavity with compressed air, the water in the water chamber is absorbed by the compressed air in the air chamber through the rubber diaphragm, and the flow into the system is basically steady. But to achieve the basic requirements of steady flow, there is a premise that the gas pressure in the gas chamber should be compatible with the water pressure.
Thus, before the sprayer should be properly inflated diaphragm pump chamber. How to inflate properly?
Method 1. diaphragm pump before operation, the first inflatable to the gas chamber, the pressure is greater than the working pressure of the pump. Driven diaphragm pumps, transferred to the working pressure, this time you can see the pump water drastic jitter. Take a needle, the top of the gas nozzle at the deflation, with the deflation, the water hose jitter will gradually disappear. After the water hose steady, stop deflating.
Method 2. Drive the diaphragm pump to adjust to working pressure. At this point because there is no pressure in the gas chamber, the pump water hose fierce jitter. Inflation immediately to the gas chamber, with the inflatable, water hose jitter disappear. Stop the inflation after the water hose is steady.
The above two methods are operating under the operation, the operation must pay attention to safety.
This article Keywords: diaphragm pump
Friction idler roller is made by two parts, plain roller and round friction disk. It is used for automatically training belt by friction self-aligning idlers. Through the rotating components in the center, aligning idlers will correct excess misalignment of belt. When the belt is leaning to one side, friction idlers will rotate to the same side to supplies a reaction to train the belt and keep the machine running normally.
Friction idlers usually deep groove ball Bearing For Conveyor Idler roller.
Series 60.., 62.., 63.., Open/ ZZ/2RS..
6200 Series - Light Series Ball Bearings – Balanced between space and load capacity
6300 Series - Medium Series Ball Bearings – Ideal for heavier load capacity applications
To be the first class, to do the best quality, to make users satisfied, to ensure customers relieved, are our enterprise purposes. Welcome bearing dealers` and Conveyor Idler manufacturers contact from all over the world, and become our partner.
Friction Idler,Conveyor Friction Idler,Friction Adjusting Idler,Belt Conveyor Adjusting Idler
Shandong Xinkaite Bearing Co., Ltd. , https://www.conveyorbearing.com
没有评论:
发表评论